The four sides and the bottom
have been assembled to this point.
The sight glass has been
installed.
Inside baffles and tank fittings
installed and sealed.
The other end of the tank.
Mounting clips installed.
I'm ready to seal up the tank.
Here, the vent line is installed and the edges masked to keep Pro-seal from
getting everywhere.
The inside of the top is masked
and scothbrited and cleaned.
The outside of the tank is
masked as well.
Top installed and cleaned up.
Now ready for the final step, the fuel sender.
Tank is finished.
Next step is to begin work on
the controls. That work starts on the next page.
|