The finish kit has arrived.
All parts are in good condition and ready for assembly.
Before getting started, I
re-arranged the hangar.
I re-purposed the tailcone jig
to support the aft fuselage.
A little reminder to be careful.
First action was to install the
gear legs, wheels, and tires. One axle is toed out so I ordered some
shims.
I installed the shims and the
wheel pant brackets.
Inside of the wheel
installation.
Nose gear/wheel/tire installed.
The airframe is on the gear.
Next step is to install the
wiring harness. That work begins on the next page.
|